COBB FA50 (Fast Action) BMG Sniper
Cobb .50 cal;
New Improvements on an Old Design
by Rob Sheppard
Copyright 2004 Sniper's Paradise
One of the ways to gain quick recognition of a new product is to take something that everyone wants but offer it in a package no one else has. Cobb Manufacturing Inc. has done that with their new Fast Action .50BMG, or FA50 for short.The new twist on the standard .50BMG theme here is in the action, or, as CMI calls it, the Fast Action.
They looked at the strengths and weaknesses of the 2 basic .50BMg actions, the bolt action and the semi-auto, and came up with something new. They wanted a rifle with the accuracy of a bolt-action, but quicker to operate. The semi-auto .50’s tend to be less than desirable in the accuracy department. One of the main drawbacks of the bolt action variants is that you have to move your head off of the stock to cycle the bolt. CMI also wanted to deal with the capacity issue that many models have.
The Fast Action is built on an AR15 style platform with a separate upper and lower receiver fastened with 2 pins, fore and aft. The upper and lower receivers are machined out of T7-7075 aircraft aluminum with an integral MIL-STD 1913 rail. There is no charging handle protruding from the rear of the receiver, ala AR15. Instead, there is a charging handle projecting from the left side of the receiver, similar in placement to an FN FAL. The handle is “fixed” in that it does not fold down like some FAL variants. The reason for this is so that it can be used as a “forward assist”.
The buttstock is a standard A2 buttstock, along with the pistol grip, allowing the use of any aftermarket stock or pistol grip.
Unlike the Barrett M82A1, the FA50 was designed so that it will not fire if the weapon is out of battery.
The bolt is machined out of 4340 steel and the bolt carrier is machined out of 4150 steel. The bolt head is the spitting image of an AR15 bolt, just much larger, with a very beefy extractor. All steel parts are protected with a parkerized finish and the aluminum bits are MIL-SPEC black hard anodized.
The barrel on this rifle is a 22”, free-floated Lothar Walther with a 1 in 15” twist.
Capping the muzzle is the excellent muzzle brake. The carbine is 50” long and weighs
23 pounds. Rounding out the package is a steel M60 bipod, 2 10-round staggered column box magazines
all packaged in a fitted Starlight case.
CMI manufactures the magazines themselves and they were beauts. Very sturdy, with machines aluminum followers, they functioned perfectly. They hold 10 rounds in a staggered configuration and resemble M14 magazines cut for an AR15 magazine release.
The following FA50 parts will interchange with MIL SPEC AR15 parts: trigger and trigger spring, safety selector switch, detent and spring, trigger and hammer pins, pistol grip and screw, buttstock assembly, trigger guard and pin, buffer detent and spring, magazine catch and spring, and lower receiver extension tube.
The FA50 was easy to operate. Load one of the 10 round staggered column magazines and insert it straight into the magazine well, exactly like an AR15. Pull the bolt fully to the rear and let it fly. The bolt has a large buffer-like spring to the rear that shoves the bolt forward, stripping a round from the mag and chambering it. Give the handle a shove to ensure that the bolt is fully seated and you are ready. Personally, I rarely gave the bolt the extra little shove and it never failed to seat for me.
Each time you fire, pull the bolt to the rear and let it go. It was quick, simple to operate and functioned flawlessly. I never had to lose my stock weld to chamber a new round and the charging handle was easy to reach. A little note, if you are using rings like the Badger Max 50’s on the test model I fired, with large nuts to hold them to the mount, you’re better off mounting the nuts on the right side of the optics. That will save you from skinning your knuckles. Ask me how I know!
The FA50 will handle any standard .50BMG ammunition. The carbine upper drops the weight to
23 pounds. We were only able to test the system on a 100 yard range. The temperature was around 94 degrees F (an average Georgia day!). We shot off of the supplied bipod with a rear bag, both from a bench and prone.
The trigger pull was very crisp, but also very heavy. According to CMI, that’s the nature of the beast. If they lighten the trigger down too much it will not reliably ignite the primers. The crispness helped and overall the trigger was easy to use once you got used to it.
I would very much like to see a lighter trigger, but it was no worse than other .50’s I have shot. It required a little more
aggression than I commonly use on a precision rifle. The charging handle required a stiff pull but was easy and quick to operate once you had a feel for it. We experienced no problems whatsoever with functioning. I envisioned a well-trained 2 man team, one firing while the other worked the bolt. Even without that, you could work the bolt and reacquire the target about as fast as you could accurately shoot.
My best group was well under the guaranteed 1 MOA, more like .5
MOA. I shot several other groups that were just at and under 1 MOA. This was shot with approximately 5 minutes between each round and the bolt locked back to help cool the barrel. In the attached photo the group in the orange is my best 3 shot group, with the one underneath it a separately fired 3 shot group, just around .75 MOA. I can’t wait to take the system out and put some distance on it, as that is where the big .50’s really excel.
I was continually comparing this system to the Barrett M82A1, as that is the .50 with which I have the most experience with. It is what we used in the Marine Corps and I have shot them numerous times since my EAS.
I felt the FA50 was superior to the M82A1 in many ways. Quite frankly, I always found the Barrett to be wanting in the accuracy department. The FA50 was more accurate and that is the most important aspect of such a rifle.
There are less moving parts which should make it less susceptible to malfunctions under extreme conditions.
I also like the fact that the FA50 will not fire if it is not completely in battery. It quickly and easily breaks down for cleaning and transport, simpler and faster than the Barrett.
Overall this is quite some package. Pull 2 pins and the weapon breaks down into 2 halves for easy storage in the supplied Starlight case. All the machine work was flawless and quite beautiful to behold if you enjoy a well-made piece of steel or aluminum. The entire system was very sturdy and rugged, built to last.
Serious Buyers Only. Please do not bid if you don't intend to buy.
Check local laws before biding. All items not legal in all areas.
If you have any question about legality check with local ATF or law enforcement.
They will be glad to assist. No Returns, No International Shipping, No face to face sales of firearms, no exceptions.
If you have zero feedback please do not bid on any auction listed by
I will ship to the address that you have on file with Gunbroker, so update your address information if you want to receive your item.
Sorry this has been a problem in the past. If item is ATF regulated then
it must go to an FFL dealer.
All FFL rules and NFA laws apply. Prior to bidding, ensure your dealer will accept this from an
individual who will provide a current valid drivers license as form of
identification. Please email FFL or enclose copy of FFL with payment. Will not ship until I receive FFL and I verify it.
Payment due within 7 days of auction close. Shipping and handing is
charged at cost. I will email tracking number.
Payments should be in form of Postal Money Order, Cashiers Check, Money Order or Personal Checks made out and sent to sellers contact information as it appears on file with
Gunbroker. Yes the address and contact information on Gunbroker file is correct and up to date.
Preferred payment is postal money order, will ship next day. Any other form of money order will be held until funds clear.
Personal checks will be held for 10 to 15 days or until funds clear.
have any information please contact me, I will appreciate it very much.