CETME 308/NATO Laser Sight Leather Sling Wood
Used Condition
FFL is required
Current Bid
No Bids
BuyNow! Price Was
Starting Bid
No Reserve!
0 Bids Bid History
Time Left 15 min rule
Item has Ended
7/31/2017 9:48 PM
Item 670227612
Location Houston, TX 77065
See Item Description
No international shipments
Payment Personal Check, USPS Money Order, Money Order, Certified Check, See Item Description
Checkout Yes
Sales Tax
Seller does not collect sales tax
Inspection/ Return Policy

The seller of this item assumes all responsibility for this listing. You must contact the seller to resolve any questions or concerns before placing a bid. Payment must be made using U.S. dollars ($) unless otherwise stated in the listing. Firearms may only be shipped to a licensed dealer (FFL Holder). Some listed items may not be legal in every state. Complete your purchase within the law.

Please read the Item Characteristics for important listing details.

You are viewing a CETME semi-automatic rifle chambered in .308 Winchester and 7.62x51 NATA (shoots both rounds). I am placing 3 of these rifles into auction at the same time. They should be listed chronologically very close together, if not in sequence without gaps. You might want to review all 3 before placing a bid.

Layaway 25% down and 15% per month until paid in full (works out to about 6 months). If Buyer is in good standing during the layaway period, Seller will refund half of all payments made at any time if Buyer changes mind for any reason. Or suggest layaway terms to better suit your needs.

This CETME has nice wood stock and forearm, OSPREY International Laser Sight, and factory leather sling. The rifle is supplied with 4 20-round mags. All 4 mags snap into the rifle mag well with a smooth but firm click, so they are obviously seating well and should feed rounds reliably. Seller has not test fired the rifle, but the previous Owner stated that it is in great functional condition. See the many photos – this is a clean and nice Century Arms CETME specimen.

Special Note: All reasonable offers will be considered. Feel free to suggest a sales price via the Gunbroker email system. If we agree on a price, I will change the auction to have a BUY NOW amount equal to the agreed amount. Important: (1) All sales must be completed through Gunbroker. (2) Gunbroker richly deserves its fee for the very fine service they provide us all. (3) Do not ask to finish the transaction outside of Gunbroker.

CETME, (Spanish for Centro de Estudios Técnicos de Materiales Especiales, or "Centre for Technical Studies of Special Materials" in English) is a Spanish government design and development establishment. While being involved in many projects CETME was mostly known for its small arms research and development. The CETME Model 58 and CETME Model L are its most notable projects. CETME also designed the CETME C2 9mm submachine gun, and the CETME Ameli light machine gun in 5.56×45mm NATO.

The CETME Model 58, is a stamped-steel, select-fire battle rifle produced by the Spanish armaments manufacturer Centro de Estudios Tecnicos de Materiales Especiales (CETME). The Model 58 used a 20-round box magazine and was chambered for the 7.62×51mm NATO round (although originally designed for the reduced power Spanish 7.62×51mm cartridge). The CETME 58 would become the foundation of the widely deployed German Heckler & Koch G3 battle rifle. Semi-automatic variants were also produced for the civilian market.

The CETME (Centro de Estudios Tecnicos de Materiales Especiales) rifle was designed primarily by the German engineer Ludwig Vorgrimler, who based his design on the experimental German StG 45(M) and the French-made AME 49. The StG45 used a roller-delayed blowback mechanism somewhat similar to the roller-locking system patented by Edward Stecke in the 1930s in Poland and used in the MG 42. The MG42 locking system actually locks completely and requires a short stroke barrel that travels backwards to unlock, compared to the StG45(M) system that never completely locks and does not require a moving barrel.

The CETME design inherits the StG45(M)'s fixed-barrel. However, the CETME Model 58 introduced a novel solution to the problem of cartridges sticking in the chamber. That is a fluted chamber, which are horizontal grooves in the chamber, that allow the cartridge cases to float on a layer of gas to aid extraction. The horizontal marking left on spent cartridge cases has become a signature of this design.

The first prototype rifles fired the same 7.92×33mm Kurz round as the StG45, and a variety of experimental 7.92 and 7.62mm cartridges were tested before settling on the 7.62×51mm CETME. This round was dimensionally identical to 7.62×51mm NATO, but with a lighter bullet and powder charge to reduce recoil, making fully automatic fire more controllable. Due to feedback from Heckler & Koch, the production rifle was chambered for the more powerful 7.62mm NATO. The Model B went on to be the foundation of the widely deployed Heckler & Koch G3 battle rifle.

Production of the rifle began in Spain in 1957. The CETME series of battle rifles were manufactured in four basic models: the A, B, C and E models. The primary difference in the production models is the modes of fire, the absence of bipod and lighter weight for later models. The L, LC and LV variants fire the smaller 5.56×45mm NATO cartridge.

The Model A's were the developmental prototypes. These models were unusual as they fired from the closed bolt in semi-automatic and from the open bolt in full-auto mode. Later production models fire from only the closed bolt. The Model A's are easily identified by the position of rear sight and bi-pod folded back to form fore-stock.

The Model B was the first production model. It had a perforated steel handguard and chambered for the 7.62×51mm CETME round. The 7.62 mm CETME differed from the standard 7.62mm NATO round by having a lighter-weight bullet and a smaller propellant charge. The parts for the Model B are for most part interchangeable with the later Model C rifles. The Spanish Army adopted a variant of the Model B re-chambered for the more powerful 7.62×51mm NATO round. The Model B could be converted to fire the 7.62mm NATO round if the bolt group and return spring are replaced with that of the Model C.

The Model C was a lightweight version that was chambered for the 7.62×51mm NATO round and had wooden fore-stocks. The Model C is virtually identical to the Model B. However, certain components had been strengthened to better deal with the increase power of the standard 7.62mm NATO round. It was adopted by the Spanish Army, Air Force, and Navy in 1974.

The CETME Model E replaced the wooden parts of the stock with plastic and the steel components with aluminum. After a short period on the production line, it was discovered that they were weaker than the previous models and that continuous fire deformed the firearms rapidly, and due to this, relatively few were produced and they were quickly discontinued.

The CETME Model L was a downsized variant of the CETME system, chambered for the 5.56×45mm NATO cartridge. It was adopted by the Spanish Army in 1984 and was in service until it was replaced by the Heckler and Koch G36 rifle in 1999.

In the late 1990s Century Arms International (CAI) began offering semiautomatic only civilian versions known as the CETME Sporter, which are manufactured from assembled military surplus and US made parts. Although largely built from Model "C" parts, there have been reports of model "B" parts in the Model "C" Century built rifles.

Due to the restrictions against importing receivers of select fire weapons, all receivers for these civilian versions are made in the US. Earlier receivers were of cast aluminum, while later receivers were made from stamped and welded steel. Earlier rifles retained the wood furniture of the originals while later examples were available with Heckler & Koch style composite stocks. Due to state and local laws restricting weapons with assault weapon features, the CETME Sporter is also available with a permanently pinned muzzle brake rather than the original flash hider. Both civilian .308 Winchester and NATO 7.62×51mm ammunition may safely be used in the CETME sporter.

Century International Arms is an importer and manufacturer of firearms that is based in the United States. The company was founded in 1961 in St. Albans, Vermont, with offices in Montreal. In 1995 the company headquarters and sales staff moved to Boca Raton, Florida and to Delray Beach, Florida in 2004. The company was started after William Sucher, a typewriter repairman, took a Lee–Enfield rifle in trade against a typewriter he had repaired for a customer. Having no need for the rifle, he posted a newspaper classified ad to sell it and received more queries about the rifle than he had for typewriters. He then sought sources of surplus rifles that he could sell for a profit. With his brother-in-law, Manny Weigensberg, Sucher made contacts in foreign countries for the importation of military surplus rifles and handguns and by the 1970s Century became the single largest importer of firearms in the United States and Canada. When sources of importable surplus firearms have become scarce, Century has manufactured their own firearms. The company has manufactured versions of the G3, L1A1, AK-47 and sporterized Mausers among others.

The .308 Winchester (pronounced: "three-oh-eight" or "three-aught-eight") is a rimless, bottlenecked rifle cartridge and is the commercial cartridge from which the 7.62×51mm NATO round was derived. The .308 Winchester was introduced in 1952, two years prior to the NATO adoption of the 7.62×51mm NATO T65. Winchester branded the cartridge and introduced it to the commercial hunting market as the .308 Winchester. Winchester's Model 70 and Model 88 rifles were subsequently chambered for the new cartridge. Since then, the .308 Winchester has become the most popular short-action, big-game hunting cartridge worldwide. It is also commonly used for civilian target shooting, military sniping, and police sharpshooting. The relatively short case makes the .308 Winchester especially well-adapted for short-action rifles. When loaded with a bullet that expands, tumbles, or fragments in tissue, this cartridge is capable of high terminal performance.

The .308 Winchester is one of the most popular hunting cartridges in the United States, and possibly the world. It has gained popularity in many countries as an exceptional cartridge for game in the medium- to large-sized class. In North America it is used extensively on whitetail deer, pronghorn, and even the occasional caribou or black bear. Clay Harvey, an American gun writer, says it is usable on moose and elk. Layne Simpson, an American who has hunted in Sweden, says he is surprised how many hunters there use the cartridge. Craig Boddingtons was told by a Norma Precision executive that the .308 is one of Norma's best-selling calibers.

In Africa the .308 Win is one of the most popular calibers among Bushveld hunters and is used on anything from duiker right up to the massive eland (a small and large African antelope respectively). Proponents of the hydrostatic shock theory contend that the .308 Winchester has sufficient energy to impart hydrostatic shock to living targets when rapidly expanding bullets deliver a high rate of energy transfer..

Additional $45.00 Shipping is to pay for fully insured (insurance is a big part of the cost) FedEx Ground shipping to all states except California, Alaska, Maryland, New Jersey, and Hawaii. In those states add $15. Shipping will be fully insured, and packaged securely to protect your investment. You will be emailed the FedEx Ground Tracking Number same day as shipping. Please send you FFL by email promptly so shipping paperwork can be prepared to support fastest shipping to you.

This is a nice, clean, lightly-used CETME with laser sight and sling and ready to hunt with one of the finest hunting rounds available for medium size game. Laser sight works. Enough mags are provided to fire for quite a while before you have to let the barrel cool anyway! BTW, the fixed iron sights work fine under the laser sight. Don’t miss this opportunity!! Get your bid on the table now!! Check out my 70+ other auctions! Consider using the LAYAWAY Option!!!!!

Seller provided no "Additional Terms of Sale"
.308 Win.
Mfg Part Number