AR15 M16 jig Class II AR-15, M-16 80% + 9mm
Factory New Condition
FFL is not required
Current Bid
No Bids
BuyNow! Price Was
$305.00
Starting Bid
$285.00
Reserve Not Met
0 Bids Bid History
Time Left 15 min rule
Item has Ended
8/4/2017 8:53 AM
Item viewed 28 times.
Item 676713171
Location Overland Park, KS 66207
Shipping
Priority Mail$20.00
See Item Description
Seller ships internationally
Payment Visa / MasterCard, American Express, Discover, PayPal, USPS Money Order, Money Order, Certified Check
Checkout Yes, Immediate
Cash Discount The above prices on this item reflect a 3% cash/check discount. This discount is not valid for credit card purchases. Add 3% to the total cost for credit card purchases.
Sales Tax
Seller must collect sales tax from the following states:
KS 8.9%   
Inspection/ Return Policy
AS IS - No refund or exchange

The seller of this item assumes all responsibility for this listing. You must contact the seller to resolve any questions or concerns before placing a bid. Payment must be made using U.S. dollars ($) unless otherwise stated in the listing. Firearms may only be shipped to a licensed dealer (FFL Holder). Some listed items may not be legal in every state. Complete your purchase within the law.

This complete jig system is designed specifically for 80% mil. spec. receivers. This unit accurately locates all of the drilling holes as well as graphically depicts the specifics of the 2 different (semi and select-fire) fire control pocket depth layouts. The entire AR 80% completion process may be easily done with only a drill press and Dremel tool for those who do not have access to a milling machine. This unit is also popular with LE armorers in that their current AR carbines can be reconfigured to select-fire and/or modified to a plastic quick change 9mm conversion on site and then the Form 1 is filed. That way there is no longer any wait for acquisition because of an BATF approval of a transfer, nor the loss of control of the firearm by shipping.

The older version of this jig was revised to make it more ‘modular’ in use for the end-user. That way the milling/drilling applications for both this system and my ‘no frills’ version always remain the same. Therefore the longer sideplates have been done away with and only sideplates for specific uses are used. That way some customers are not ‘penalized’ into purchasing more features that they need.

In addition, there is also included a “first-of-its-kind” sideplate set to assist both in the insertion into and protection for the receiver from the installation of the 2 awkward roll pins, which are the bolt catch and the trigger guard. Also there has been added a front pivot pin installation assist tool as well as a trigger assembly pin particularly useful for the 4-position groups. This new revision comes with all 5 sideplates (2 for 9mm modification, 2 for fire control pocket work and then the assembly assist plate). THE YOUTUBE VIDEOS SHOWING HOW QUICKLY AND EASILY THE JIG WORKS ARE BELOW (EARLIER REVISIONS). The link for a free set of instructions is also below.

A new modification has been added. Since there have been more and more 80% receivers being introduced onto the internet marketplace which are advertised as Mil.Spec. but really aren’t, I had to add another piece as well as modify existing ones to insure that the fire control pocket layouts remained properly centered. If the receiver is too wide, my top pieces would justify themselves to one side or the other leading to an off-center condition. Now the top pieces ‘free float’ from the sideplates, but are locked in place centered with the magazine well opening which is always machine-centered for proper firearm ‘action’. Those who have purchased this unit in the past, contact me if you are interested in upgraded replacements. Skip forward to 4:40 to bypass the AK PRO update.


AR PRO top alignment centering modification (click here)


Another innovation that is not available elsewhere is the addition of a quick change modification to the popular 9mm platform. No longer is the armorer required to remove and then re-install the bolt catch and its roll pin for the insertion of the lesser expensive magazine well adapter back at the shop (or have a dedicated lower receiver), now the operator in the field may do so in the same fashion as easily as swapping a magazine. It is done by using this jig’s bushing protected holes to drill thru the magazine well and retained by a spring loaded clevis pin. Entire caliber swap should take less than a minute at the range. Now you may use your same lower for .22LR, 9mm, .223/5.56, .300BLK. Videos are below.


AR PRO jig 9mm adapter modification jig assembly (click here)


AR PRO jig 9mm adapter modification drilling, cutting, final fitting (click here)


AR PRO Overview (click here)



Assist demonstration (click here)


9mm modification instructions (click here)


Due to demand by other Class II manufacturers, I have just added an M16 direct kit which is designed and includes M16-only top plates (1 milling and 1 drilling). This way Class II's can directly make their M16 version rather than make the AR first and then convert to select-fire using my included conversion templates. Another insert (with an additional drilling bushing) has been added for the drilling of the trigger through the bottom (80% forgings only-without permanent trigger guard). Look into my other auctions to find it.

While most other jigs out in the marketplace take full advantage of the "precision slop" of an AR-15, my jigs have to be precise due to the lineup of hammer to bolt and autosear to bolt trip point. AR's just need the hammer to be re-cocked each time, whereas M-16's have to be exact for proper release/catch of the hammer.

I have listed a more economical 80% completion jig without all of the assembly extras which are included with this deluxe kit.

THIS KIT WILL NOT FIT ARES ARMS BILLET LOWER RECEIVERS. I HAVE A SPECIAL RE-DESIGNED KIT EXCLUSIVELY FOR ARES ARMS, LLC., Medina, OH. PLEASE NOTIFY ME AFTER YOUR PURCHASE AS TO WHICH KIT YOU REQUIRE. THE ARES KITS WILL NOT FIT MIL.SPEC. AR FORGINGS. IF YOU ARE THE LEAST BIT UNCERTAIN, CONTACT ME BELOW.


AR PRO JIG ASSEMBLY SYSTEM OVERVIEW VIDEO (click here)


FREE INSTRUCTIONS in PDF format (click here)


Roll Pin installation and front detent assist video (click here)


Roll Pin installation demo in older aluminum sideplates - both pins video (click here)


Magazine button and trigger installation assist video (click here)


As is evident from the photos and videos included here, much time was spent on details in the design and manufacture of these jigs as well as creating the very detailed 21-page jig usage instructions with color 3D cutaway CAD drawings which include all listed (.001”) measurements which are sent via email upon shipping confirmation after the sale. Hardened steel drilling bushings have been inserted into the sideplates for the hammer pin, trigger pin, auto-sear, as well as the fire select switch and trigger for long-term reuse. A patent has been applied for (patent pending). Video below is for my aluminum version jig assembly showing line-up of all holes.

For a lesser expensive jig (but without the assembly jig and some non-essential templates) use the link below.


DIRECT SALE OF LESSER PRICED UNIT FROM MANUFACTURER--- www.machinegunguy.com (click here)


80% jig assembly video Class II, ALL NFA RULES APPLY (click here)


The video below is a 3D slide show showing how the drill only top is done.


Top drilling plate video slide show of use (click here)


In addition, while the other Class II conversion jigs only attempt to layout just one hole; these additional features are also incorporated into this kit to accurately mark both holes on both sides as well as include the top (select-fire) milling template along with denoting the 3 unique depths of the auto-fire control pocket on the jig’s sides. No other jig kit has anything remotely similar to these features. All of the metal jigs available cannot support the trigger guard at all since they all use ½” plate, therefore none can assist you in the installation of the roll pin there. Also included in these instructions are the little known and rarely disclosed armorers’ techniques regarding the bolt/auto-sear release “timing” measurements which are done with a feeler gauge through the magazine well. I also have all parts kits (3 but not 4 position fire control parts), BGC assemblies, and complete SBR upper assemblies available for purchase. ALL NFA RULES APPLY.

Pictures shown below were done with some brass tubing to prove my products’ accuracy with a factory-produced Law Enforcement / Government Use Only select-fire lower. Note the protrusions pass completely through both jig sideplates as well as all fire control holes. The quality of all aspects of these kits will give the utmost confidence for the completion of your 80% receiver. Take the time to notice all of the details including the engraving on the parts themselves in each of these photos. Further details are on the YouTube videos above. Jig/template assemblies and all parts in the photos are included (lower receivers and/or lower receiver parts kits and tools are not included).

This fixture may be lawfully owned by anyone, but ALL NFA RULES APPLY regarding the use of some of the features incorporated into this product. You (the purchaser) are solely responsible for how this item is used and I (the seller) shall not be held accountable for any misuse of this drilling/milling jig by you (the purchaser), whether Class II or not. It is important to remember that to fully comply with ATF’s “home made” rulings, make certain that whatever manufacturer’s 80% lower you decide to start with has not had any type of prior work done (even including work done by a friend) in the fire control pocket area (which includes any kind of top, bottom, or side holes, marked holes, or even depressions/grooves). If it has, it would no longer meet the 80% criteria and therefore would already be classified by ATF as a live firearm and your work on it (unless you are already a Class II manufacturer) would immediately put you (the purchaser) at risk for violating the Gun Control Act.

I do not list these items on Gunbroker unless they are ready to ship on the following business day after receipt of funds. All parts included are either “New or Old Testament Scripture Engraved”, if that offends, please purchase another product from another vendor. My products are made in America, by an American, for Americans.

Shipping is $20 by USPS priority mail for 50 state US shipping via Priority Mail. International shipping is paid by buyer and subject to an additional $15 handling fee. All transactions are done anonymously and money orders/cashier’s checks get the auction price, whereas charge cards have a 3% surcharge at checkout.

Soon to follow will be a "router style" of jig for both the AR-10 as well as AR-15, and 80% receiver for the Colt 1911 pistol. Another jig is available for the HK 90 series of rifles for all calibers made with the new flats, I have also added a mini conversion jig that is universal to all AR-10 and AR-15 variants including the polymer models in addition I have jigs for the AK family as well as the Ruger 10/22. Check my “other auctions” for updates as to when these new units become available. Also to be added will be the UZI with all Class II modifications.

This jig along with all of the others that I design, manufacture, and sell, was “over-engineered” for those who value their time and money. Since I have attempted to foresee and surmount any and all possible errors which could happen during your construction(s), the possibility of your making mistakes approaches zero.

Nothing is more disappointing than a mishap that requires a replacement receiver or part. Not only is there a monetary loss, but there is also the frustration factor due to the lost time in the work thus far, perhaps a broken tool or fixture, then there is the wait involved for the replacements to arrive from the other supplier via shipping. Now what should have been reasonably fun has become work. Those frustrations only follow my competitors’ sales (if you can call them competitors), but not my clients. That being said, if you are unsure of your milling capabilities, let me remind you that this jig is made of plastic and is NOT designed to be a machining tool stop. If you hit plastic with a high speed steel mill bit at 2,000RPM, the plastic will always shatter, which would be defined as pilot error.

In my efforts to make this the finest, most accurate jig available, I continually re-examine my product line and I also listen to suggestions by my customer base. That being said, there is always the possibility that an update/revision has been incorporated and the product may have changed in either shape or color from what has been pictured. Regardless, the functionality for which the jig was designed for will ALWAYS be enhanced with each revision.


DIRECT SALE FROM MANUFACTURER--- www.machinegunguy.com (click here)

If you are the winning bidder on this auction DO NOT go to the www.machinegunguy.com website above to pay for it. The transaction started here, so it MUST BE COMPLETED HERE. If not, you will be responsible for all additional fees involved with the duplicate transaction.


CLICK HERE FOR ALL OTHER CLASS II JIG LISTINGS (AR-10, AK-47, RUGER 10-22, HK 90 SERIES)


The following 5 and 10 minute videos are promos of my AR BOOT, a 0% raw forging/finishing jig system which is not included for sale with this 80% kit listed here. The accuracy of this jig was critical in the exact layout of the roll pin assist holes. These videos are here only for your information to see how accurate our entire product line is.


AR Boot assembly video slide show (click here)


AR Boot video (click here)


Do-it-yourself firearms page from www.machinegunguy.com (click here)


E-mail me if you have a question (click here)


I also now offer forged mil.spec. unmarked, anodized, enhanced 80% receiver blanks. These are not the blemished versions as offered by other vendors. Photos of these are included on the AR PRO deluxe package listed elsewhere on Gunbroker (see my other auctions). Contact me for pricing and details.

LOWER RECEIVERS AND LOWER RECEIVER PARTS DEPICTED IN THE PHOTOS ABOVE ARE NOT INCLUDED IN THIS AUCTION. IF YOU WISH TO PURCHASE THOSE PARTS SEPARATELY, CONTACT ME.

For those who are curious about what the Bible says about “gun control” 2000 years ago, look up Luke 22:36. Thank you for your attention and good luck with this auction.

Further critical discovery topics for you and your families: Revelation 12 occurs on Sept 23, 2017, Feast of Trumpets, Rapture, Jubilee years, Blood moon Tetrad, solar eclipses

Seller provided no "Additional Terms of Sale"
UPC
 
SKU
 
Mfg Part Number
AR PRO  
Weight