New AR-15 Pistol Kit "Trident Mark II" AR15
Factory New Condition
FFL is not required
Unit Price
Quantity Purchased
Time Left
Item has Ended
8/8/2017 7:42 PM
Item 676743041
Location Chino, CA 91710
Buyer pays estimated shipping for the following option(s): Priority
Shipping methods may vary based upon price
No international shipments
Payment Personal Check, Visa / MasterCard, USPS Money Order, Money Order, Certified Check
Checkout Yes, Immediate
Sales Tax
Seller must collect sales tax from the following states:
CA 8.9%   
Inspection/ Return Policy

The seller of this item assumes all responsibility for this listing. You must contact the seller to resolve any questions or concerns before placing a bid. Payment must be made using U.S. dollars ($) unless otherwise stated in the listing. Firearms may only be shipped to a licensed dealer (FFL Holder). Some listed items may not be legal in every state. Complete your purchase within the law.


If you want this kit assembled and test fired check out our other listing: AR15 TRIDENT MARK II Kit (Assembled & Test Fired)

AR-15 Super Slim Ultra Light Free Float 7" Inch Carbine Length Handguard

Material: Aircraft Grade Aluminum

Rail Type: Picatinny/Weaver

Dual Rail Type: Top/Bottom

Super Slim Design 1.35" Inner Diameter

Length: 7" inch

Height: 2.27" inch

Width: 1.65" inch

Weight: 7.4 Oz.

Includes: Detachable slotted accessory rail sections and a Solid Steel barrel nut for easy installation.

AR-15 7.5" Barrel .223 Wylde 1:7 Twist

Chamber: 5.56/.223

Length: 7.5"

Twist Rate: 1:7

Gas Port: 0.750"

Gas System: Pistol

Thread Pitch: 1/2x28

Feed Ramps: M4

Finish: Parkerized 

Made In USA

AR-15 Multi Ported Flash Suppressor Muzzle Brake

CNC Machined High Quality Steel

Heat Treated

Multi Ported Design

Solid Machined Construction

Black Oxide Finish

Tuned ported on top to Reduce muzzle rise

Solid bottom controls dust printing

1/2"x28 Thread Pitch

Weight: 2.2 oz.

Lenghth: 2" Approx.

AR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.

High quality and lightweight stripped Upper Receiver

Material: Aircraft grade Aluminum

Finish: Black Anodized

AR-15 .223/5.56 Bolt Carrier Group- Black Nitride



Machined from 8620 tool steel

Heat treated to military specifications


Machined from 9310 tool steel

Heat treated to military specifications

Shot Peened

Ground to meet military required tolerances

MPI (Mag Particle Inspected)

Gas Key

Machined from 4140

Heat treated to military specifications


Machined from 4140

Heat treated to military specifications

Shot peened

Firing Pin

Machined from 8640 tool steel

Heat treated to military specifications

Ground to meet military required tolerances

Coated with .0002”-.0003” of hard chrome per MIL-STD-171

Cam Pin

Machined from 4340

Quench and temper heat treat

Ground to meet military required tolerances

Charging Handle

Body is 6061 T6 Billet Aluminum

Latch is 7075 T6 

Black Type III Hardcoat Anodizing

Dust Cover

Dust Cover, Spring, and Rod are constructed from 4150 Steel

Black Type III Hardcoat Anodizing

Forward Assist

Constructed from 4150 Steel

 Includes Plunger, Forward Assist Pawl, Retainer pin, and spring

Gas Block


Constructed of Steel

Set screw mounts

Fits .750 Dia Barrels

Color: Black Phosphate finish

Gas Tube

Material: Stainless Steel (optimal heat and corrosion resistance)

Mil-Spec Dimensions (consistent gas flow)

Made in the U.S.

AR-15 Standard Lower Receiver Parts Kit-LPK17

Complete Kit Includes:

  Standard AR-15 Pistol Grip (Black)

    Standard Trigger Guard

    Semi Trigger

    Semi Hammer

    Semi Disconnector

    Semi Selector

    Bolt Catch Spring

    Detent Spring

    Bolt Catch Buffer

    Take Down Detent

    Bolt Catch

    Magazine Catch Spring

    Bolt Catch Roll Pin

    Magazine Catch Button

    Magazine Catch

    Front Pivot Pin

    Hammer Spring

    Trigger Spring

    Pistol Grip Screw

    Pistol Grip Lock Washer

    Selector Spring

    Detent Selector

    Hammer Pin

    Trigger Pin

    Take Down Pin

    Buffer Retainer Pin

    Buffer Retainer Spring

    Disconnector Spring

AR-15 .223/5.56 Pistol Buffer Tube Kit - No Foam


Pistol Buffer Tube


Buffer Spring

Steel End Plate

Steel Castle Nut


CNC machined aluminum buffer tube to fit pistol buffer and spring.

Hard anodized type III black finish.

Machined lower slot to accept all end plates and sling mounting accessories.

Superior Quality Pistol Buffer Spring

Standard 3 oz buffer Quality Polyurethane Bumper for longer life

Steel Ambidextrous End plate and Castle nut.

Buffer tubes measure 7-5/16"

Foam Pad for AR-15 Pistol Stock Buffer Tube - 3.5"

Made of soft high quality foam and designed to fit over a 1.25" diameter Buffer Tube

Length: 3.5"

Width: 1.25" (expandable)

Color: Black

Front and Rear Sight Polymer Flip-Up Sights -TAN

Length: 2.6"

Weight: 2 oz

Thumb slide mechanism

Full Windage & Elevation Adjustment (tool included)

Compatible for 22mm/20mm Weaver Standard Rail

Three-Piece Polymer Angled Foregrip

Three-piece design

Includes an interchangeable finger shelf (allows for a flat surface or finger nub)

All mounting hardware included

Material: Polymer

Weight: 2.53 oz.

Length: 4.70 in.

Height, over rail: 1.94 in.

Width, maximum: 1.37 in.

Seller provided no "Additional Terms of Sale"
Mfg Part Number