Spikes Tactical Gen II Compressor 7075-T6 Billet
Factory New Condition
FFL is required
Current Bid
No Bids
Starting Bid
No Reserve!
0 Bids Bid History
Time Left 15 min rule
Item has Ended
8/10/2017 5:23 PM
Item 680337624
Location Chesapeake, VA 23320
Priority Mail$15.00
See Item Description
No international shipments
Payment Personal Check, Visa / MasterCard, Discover, USPS Money Order, Money Order, Certified Check
Checkout Yes, Immediate
Sales Tax
Seller does not collect sales tax
Inspection/ Return Policy

The seller of this item assumes all responsibility for this listing. You must contact the seller to resolve any questions or concerns before placing a bid. Payment must be made using U.S. dollars ($) unless otherwise stated in the listing. Firearms may only be shipped to a licensed dealer (FFL Holder). Some listed items may not be legal in every state. Complete your purchase within the law.

Please read the Item Characteristics for important listing details.

New Never mounted Spikes Tactical Gen II Compressor 7075-T6 Billet lower receiver. For use with any cal build. PAYMENT, Visa, MC, Discover, POSTAL MONEY ORDER OR CERTIFIED CHECK. PAYMENT MUST BE MADE WITHIN 7 DAYS OF THE AUCTION ENDING OR THE ITEM WILL BE RELISTED AND NEGATIVE FEEDBACK WILL BE LEFT. GUN WILL NOT SHIP UNTIL I HAVE RECEIVED A COPY OF THE FFL YOU WANT TO USE. Introducing the new Spike's Tactical Gen II billet lower receiver! Just when you thought it couldn't be any better we bring you this new cutting edge design. The new Gen II billet lower receiver is based off of our original Biohazard billet lower receiver but with many added features, reduced weight, and enhanced styling. If you want the absolute best AR15 lower receiver on the market then this is for you! Gen II billet lower receiver specifications and features: - 5 axis 3D machined to exact tolerances on state of the art equipment from the highest quality 7075-T6 billet aluminum bar stock available in the USA. - All edges and surfaces have been 3D chamfered to reduce snagging while still maintaining the blocky billet look. - Type III hardcoat annodized finish. - Integrated winter style trigger guard. - Integrated ambi bolt release paddle. The paddle is machined from 4140 Chromoly bar stock and features a durable black Nitride finish. - Integrated ambi magazine release paddle. The paddle is machined from 4140 Chromoly bar stock and features a durable black Nitride finish. - Over sized enhanced bolt catch. The bolt catch is machined from 4140 Chromoly bar stock and features a durable black Nitride finish. - Enhanced 6061-T6 billet magazine catch button which features a hard anodized finish. - All paddles are ergonomically positioned and optimized for both left hand and right hand shooters. The paddle surfaces and mag catch button also feature an aggressive textured finish for positive engagement. - Enhanced pivot and take down pins which were designed around the lower receiver for a unique integrated look. The pivot and take down pins are machined from 6AL4V Titanium and feature a grey hard anodized finish infused with Teflon for ultra smooth function. - The pivot and take down pins have slightly larger heads and dimples in the end which allow you to break the rifle down much quicker and easier. - Lower receiver design integrates KNS Gen 2 Mod ST anti-rotation pins. Very low profile and very clean appearance. - Large flared magwell. - Magwell is compatible with all AR15/M16 magazines including the M3 Pmag, Beta C mag, and Surefire high capacity magazines. - Magwell will drop free of ALL in-spec magazines. - The front of the magwell is textured for an aggressive appearance. - Low shelf for RDIAS use. - Set screw for adjustable trigger reset. - Set screw for upper to lower tension. - Bolt catch and bolt release paddle are retained with a threaded stainless steel pin rather than a roll pin. - Lower receiver can be assembled without a hammer and punch. - 3D machined Spider logo. - 3D machined bullet pictogram safety selector markings on both sides of the receiver. - Clean milled engraving for all text and information. - Caliber is marked Multi for use with any cartridge that will fit in an AR15 magwell. - Compatible with 45* BAD ASS, 57* V7, 60* Noveske, and all 90* safety selectors. - Pockets machined in many areas to reduce weight. The lower receiver design was engineered to put the weight and strength exactly where we wanted it. The end result is a cutting edge billet lower receiver that weighs only 248.9 grams stripped! Now you can have a billet lower receiver with full ambi controls at the weight of a standard forged receiver without sacrificing and strength. - 100% Made in the USA and back by our Lifetime Warranty! The Gen II billet lower receiver comes with the following components already installed to make your life easier: Titanium pivot pin, detent, and spring Titanium take down pin, detent, spring, and 4-40 set screw KNS Gen 2 Mod ST anti-rotation trigger and hammer pins Spike's Tactical 90* ambi safety selector Enhanced bolt catch Ambi bolt release paddle Bolt catch spring Bolt catch plunger Ambi bolt release cross pin Threaded stainless steel pin for bolt catch Threaded stainless steel pin for ambi bolt release paddle Ambi magazine release paddle Magazine catch Magazine catch spring Billet magazine catch button Set screw for adjustable trigger reset Nylon tip set screw for upper to lower tension (2) short set screws to lock adjustable trigger reset set screw and upper to lower tension set screw in place These are the parts required to complete the Gen II billet lower receiver. However these parts are NOT included: Pistol grip of choice Safety selector detent Safety selector spring (or ejector spring) Grip screw Grip screw washer Buffer retaining pin Buffer retaining pin spring Receiver extension (or buffer tube) Latch plate Castle nut Stock body of choice Buffer Buffer spring Hammer, trigger, and disconnect or aftermarket trigger group of choice While our billet upper receiver and billet lower receiver are a perfect match with each other, they will also work with forged upper receivers and forged lower receivers. The billet upper and lower receivers also maintain compatibility with most Mil-Spec components. So in the event you break or loose a component in the field you don't have to worry about finding any proprietary parts to get it back up and running again. Yes we did think of everything. :-) S/N may vary from picture FFL can be sent by email to doaarms@gmail.com or by fax to 757-282-5943 be sure to reference the auction number when sending it.
Seller provided no "Additional Terms of Sale"
Spike's Tactical
Other Spike's Tactical
5.56mm NATO
Mfg Part Number