tactical.skeleton A+(8)
Factory New Condition
FFL is required
Unit Price
Quantity Available
Immediate checkout
Sign In or Register to BuyNow!
Time Left
20d +
11/12/2017 6:15 AM
Item 682315761
Location Dallas, TX 75209
Shipping Free Shipping On: Priority
See Item Description
No international shipments
Payment Visa / MasterCard
Checkout Yes, Immediate
Sales Tax
Seller must collect sales tax from the following states:
TX 6.25%   
Inspection/ Return Policy
Factory Warranty

The seller of this item assumes all responsibility for this listing. You must contact the seller to resolve any questions or concerns before placing a bid. Payment must be made using U.S. dollars ($) unless otherwise stated in the listing. Firearms may only be shipped to a licensed dealer (FFL Holder). Some listed items may not be legal in every state. Complete your purchase within the law.

Please read the Item Characteristics for important listing details.


20” 308 FDE Custom AR-10 with LUTHAR STOCK and 16.5” Free Float Keymod Handguard

At Tactical skeleton we aim at providing the ultimate value to our customers by combining the best quality shooting accessories and the highest levels of customer service all from within our great country. We promise our customers the most competitive prices the market can offer. Situated in Dallas, TX Tactical skeleton is a startup company run by passionate Americans that love their country and support the second amendment. Our motto is with great liberties comes great responsibilities, enjoy the sport responsibly and protect our constitutional rights fellow Americans. .


• US made in scottsdale, arizona
• T6061 billet
• 1913 picatinny rail flat top-dpms low spec rail height
• manufactured from solid block of billet aluminum
• mil-a-8625 type iii anodizing
• will match up with any brand lower receiver
• accepts mil-spec .308 cal ejection port door kit and forward assist kit
• slim profile shell deflector


• 20” Heavy Bull Barrel
• 0.75” Stainless Gas Block
• Rifle Length gas tube
• Straight fluted for maximum heat dissipation
• 5/8x24 muzzle thread pitch
• 1:10 TWIST
• M4 feed ramp


• 16.5” Super slim keymod Handguard
• Steel Barrel nut
• Anodized
• T-markings on top rail
• Ultra-Light weight


• Made for 7.62X51 / 308 Cal
• Hard Nitride Finish
• HPT/MPI Tested and Marked
• 9310 Hardened Steel Bolt
• 17-4 Stainless Steel Firing Pin (Heat treated to H900 Condition)
• 8620 carrier and gas key.
• Hardened extractor S7 tool steel.
• The group comes fully assembled with properly torqued and staked gas key
• Made in the USA


• 5.5" slip over muzzle brake
• US made
• reverse thread
• 5/8"x24


• Machined from 7075-T6 aircraft grade billet aluminum
• Matte black hard-coat anodized per Mil 8625 Type 3 Class 2
• Precision broached magazine well with beveled feed lips
• Machined and engraved to be compatible with 45 and 60-degree short throw fire control selectors.
• Caliber marking of “Multi” so it can be used with many different caliber uppers
• Compatible with all standard AR-10/.308 components and magazines and most aftermarket parts — Made to DPMS spec
• Upper tension screw behind grip screw (threaded hole with hardware included) to adjust any “slop” out of vertical fit between upper and lower
• Ambidextrous trigger finger rests with grooves (above and below mag release / mag catch)
• Compatible with Norgon and other aftermarket ambidextrous mag releases
• Threaded bolt catch pin (Threaded hole and hardware)
• Integrated large opening “winter” trigger guard
• Manufactured to MILSPEC on state of the art CNC equipment for consistent quality parts and exacting tolerances


• standard milspec trigger

• Fully adjustable carbine buttstock assembly to mount to a carbine rifle (6-positions mil-spec or commercial tube) – this is our carbine stock
• additional 1? height on cheek rest
• 3-axis adjustable butt plate assembly extends additional 1 1/16? length of pull and includes the following movement:
1. horizontal for linear adjustment (i.e. length of pull)
2. vertical for a perfect butt plate fit into the curvature of the shoulder.
3. lateral adjustment for a ½ inch left or right cast
4. this butt plate assembly is interchangeable with the original mba-1 buttstock
• Includes a picatinny rail on the bottom rear of the stock body to attach your choice of many accessories.
• Designed a flat bottom index set screw (10-24) to eliminate that constant rattle of carbine collapsible buttstock. this also allows you to secure the stock in your favorite position.
• The black mba-3 comes with a medium soft rubber recoil pad, duro 85.
• The fde mba-3 comes with a fde hard butt plate as a pad. a black medium soft rubber recoil pad is available for additional purchase.
• The luth-ar mba-3 weighs roughly half that of comparable stocks coming in at just 18.5 ounces.
• Fits all .223 and most .308 ar carbine style rifles
• Super strong glass filled nylon
• Easy to replace and quick to install
• Uses 4 out of the 6 positions on a mil-spec or commercial tube

• ergonomic
• adapts to existing commercial and mil-spec buffer tubes
• certain aftermarket commercial buffer tubes that exceed 1.172? may not fit
• the vertical struts for the mba 3 are fixed therefore the cheek pc is not reversible like the mba 1 however the cheek piece itself is designed with a cheek pad for the lefty

• comes with Harris 6”-9” adjustable bipod with quick detach and ships with 42” hard-case

Please email your local FFL information to sales@tacticalskeleton.com after placing your order.
Seller provided no "Additional Terms of Sale"
Other Manufacturer
Barrel Length
20 inch
Mfg Part Number
9.00 Pounds