NEW .223/5.56 ''INFINITY'' Rifle Kit 223
Factory New Condition
FFL is not required
Unit Price
$530.99
Quantity Available
100
Immediate checkout
Sign In or Register to BuyNow!
Time Left
26d +
11/19/2017 11:52 AM
Item 685491238
Location Chino, CA 91710
Shipping
Buyer pays estimated shipping for the following option(s): Priority
Shipping methods may vary based upon price
No international shipments
Payment Personal Check, Visa / MasterCard, USPS Money Order, Money Order, Certified Check
Checkout Yes, Immediate
Sales Tax
Seller must collect sales tax from the following states:
CA 8.9%   
Inspection/ Return Policy
Unspecified

The seller of this item assumes all responsibility for this listing. You must contact the seller to resolve any questions or concerns before placing a bid. Payment must be made using U.S. dollars ($) unless otherwise stated in the listing. Firearms may only be shipped to a licensed dealer (FFL Holder). Some listed items may not be legal in every state. Complete your purchase within the law.

**THIS RIFLE KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE AND DOES NOT COME ASSEMBLED**


If you want this kit assembled and test fired check out our other listing: AR15 Infinity Rifle Kit

AR15 15" Ultra Slim Keymod Handguard W/ Steel Barrel Nut

Constructed of 7075 T6 Aluminum

Includes 2 Detachable Accessory Rails

Pre-Drilled Steel Barrel Nut

Details:

Fits any AR-15 upper receiver

7075 T6 Aluminum

Comes with Steel Barrel Nut and 2 Black 32mm Shim/Barrel Nut Washer

2 x 6 inch length detachable Rails Included

Lightweight

Monolithic top rail is continuous with flat top receiver

1913 Picatinny rail top

The Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.

15" long Rifle Length

Removable rail System

Sectional Rails Can Be Moved To Different Positions

outside Diameter: 1.536"(without Rail)

inside Diameter: 1.36" (without Rail)

Height : 1.98"

6" Slotted AR-15 Muzzle Brake Compensator - Black

Recoil Compensator w/ Sleek Custom Design

Twelve 45 Degree Ports (6 each side)

1/2" x 28 Pitch Thread

Material: High quality Aluminum

Finish: Smooth Matte Black

Length: 6"

Includes Crush Washer

DAVIDSON DEFENSE AR-15 5.56 Barrel 16" Black Nitride Finish 1-7 SOCOM

MIL-SPEC quality barrel

The  Barrel is fully head spaced to mil tolerances & chambered in 5.56 Nato

        16 inches, 1-7 twist Melonite barrel, carbine gas system threaded to 1/2x28  

Designed to shoot all types of .223 and 5.56 ammo

Exceeds us military and le requirements

Le/Military certified & tested

The barrels finish is inside and out designed to exceed the service life of even chrome lined barrels

H&M patented nitriding melonite finish is a metal treatment not just a finish giving the barrel extreme life unmatched by any other process or steel requirements.

CHF barrel blanks give this barrel an additional edge increasing barrel life even more than any other barrel in it's class.

AR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.

High quality and lightweight stripped Upper Receiver

Material: Aircraft grade Aluminum

Finish: Black Anodized

AR-15 .223/5.56 Bolt Carrier Group- Black Nitride

PROUDLY MADE IN THE USA!

Carrier

Machined from 8620 tool steel

Heat treated to military specifications

Bolt

Machined from 9310 tool steel

Heat treated to military specifications

Shot Peened

Ground to meet military required tolerances

MPI (Mag Particle Inspected)

Gas Key

Machined from 4140

Heat treated to military specifications

Extractor

Machined from 4140

Heat treated to military specifications

Shot peened

Firing Pin

Machined from 8640 tool steel

Heat treated to military specifications

Ground to meet military required tolerances

Coated with .0002”-.0003” of hard chrome per MIL-STD-171 1.2.2.2

Cam Pin

Machined from 4340

Quench and temper heat treat

Ground to meet military required tolerances

AR-15 Extended Bolt Catch & Release Lever

Constructed of Mil-Spec Anodized Aluminum

Designed for Left/Right Handed Shooters

Attaches to Standard AR-15 Type Rifles

This Extended Lever attaches to the bolt catch and extends into the trigger guard, allowing the right hand operation of the bolt catch with the trigger finger.

Charging Handle

AR-15 Tactical Rifle Charging Handle Assembly W/ Extended Tactical Latch

Mil-Spec

6061-T6 Aircraft Aluminum

Black Oxide Finish

Smoothest Operation under Extreme Conditions

Features: Oversized X- Pattern Latch for Ease of Rapid Charging of your weapon.

Fits: AR-15 Rifles

Dust Cover

Dust Cover, Spring, and Rod are constructed from 4150 Steel

Black Type III Hardcoat Anodizing

Forward Assist

Constructed from 4150 Steel

 Includes Plunger, Forward Assist Pawl, Retainer pin, and spring

Gas Block 

Low Profile Steel Micro Gas Block - Clamp-on Design

Adjustable Clamp-on design holds firmly to barrel without marring or damaging it. Low-profile to fit under most commercially available handguards.

Fits barrels with a 0.750" Diameter

Material: Hardened Steel

Finish: Smooth Matte Black

Length: 1"

Width: 1"

Includes Screws and Allen wrench

Gas Tube

Material: Stainless Steel (optimal heat and corrosion resistance)

Mil-Spec Dimensions (consistant gas flow)

Length: 9.75"

Made in the U.S.

Rogers Super-Stoc:

The Rogers Super-Stoc Deluxe rifle stock “RSS” is the ultimate refinement in AR/M4 stock technology.

The patented cam-lock system completely removes any slop or play inherent with collapsible stocks. Once the desired stock position has been selected, the stock can be locked down solid simply by depressing the cam-lock lever upward. Pressing the quick-release lever will disengage both the cam-lock, and detent pin, allowing you to quickly readjust the stock position.

Comes with removable recoil pad and Quick Detach port installed (QD swivel not included).

Fits: Both Mil-Spec and Commercial Buffer Tubes

Material: Glass-filled and non-glass-filled Nylon blends

Length: 6.75"

Width: 5"

Weight: 7.3 oz.

Buffer Tube Kit:

This kit fits .223/5.56 Mil-spec Sized stocks

6 Position Mil Spec Diameter 7075 T6 Premium Buffer Tube

Carbine Stock Lock Ring/ Castle Nut

Carbine Stock Latch Plate

Carbine Buffer Assembly

Carbine Buffer Spring

AR-15 Standard Lower Receiver Parts Kit

Complete Kit Includes:

    Pistol Grip AR-15 Right Hand Overmolded Rubber (Black)

    Standard Trigger Guard

    Semi Trigger

    Semi Hammer

    Semi Disconnector

    Semi Selector

    Bolt Catch Spring

    Detent Spring

    Bolt Catch Buffer

    Take Down Detent

    Bolt Catch

    Magazine Catch Spring

    Bolt Catch Roll Pin

    Magazine Catch Button

    Magazine Catch

    Front Pivot Pin

    Hammer Spring

    Trigger Spring

    Pistol Grip Screw

    Pistol Grip Lock Washer

    Selector Spring

    Detent Selector

    Hammer Pin

    Trigger Pin

    Take Down Pin

    Buffer Retainer Pin

    Buffer Retainer Spring

    Disconnector Spring

Seller provided no "Additional Terms of Sale"
UPC
 
SKU
 
Mfg Part Number
 
Weight