AR15 .223/5.56 Carbine Kit "Stryker"

Factory New Condition
FFL is not required
Unit Price
Quantity Available
Time Left
Item has Ended
5/6/2018 12:44 PM
Item 745110083
Location Chino, CA 91710
Buyer pays estimated shipping for the following option(s): Other
Shipping methods may vary based upon price
No international shipments
Payment Personal Check, Visa / MasterCard, USPS Money Order, Money Order
Checkout Yes, Immediate
Sales Tax
Seller must collect sales tax from the following states:
CA 8.9%   
Inspection/ Return Policy

The seller of this item assumes all responsibility for this listing. You must contact the seller to resolve any questions or concerns before placing a bid. Payment must be made using U.S. dollars ($) unless otherwise stated in the listing. Firearms may only be shipped to a licensed dealer (FFL Holder). Some listed items may not be legal in every state. Complete your purchase within the law.


If you want to get this kit assembled and test fired check out our other listing: AR15 STRYKER Carbine Kit (Assembled & Test Fired)

AR-15 M-LOK Lightweight Frame Rail System

Material: Aircraft grade 6061-T6 aluminum.

Length: 15”

Internal diameter: 1.39” width 1.67 height.

Finish: Black Hard-coat type III Anodized.  

Barrel nut material:  Steel.

6 screw fasteners design with proprietary screw for easy installation.

Flush fitment on receiver.

Inside Diameter: 1.39".

Spanner wrench needed to torque barrel nut to spec (not included) and hex wrench.

Rail comes with two 3 slots M-LOK or (1.58”).

15” M-LOK location: 8 M-LOK sections of 1.26” at3, 6, 9, 12 o’clock location has only 5 M-LOK sections/ Top rail has 7 slots or (2.9”) section of pica-tinny on the beginning and 6 or (2.45”)slots at the end of rail, the rest of the rail is skeleton cut with 5 M-LOK section for perfect customization.

Barrel: AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish

Material: 4150 Heat Treated Steel

Chamber: 5.56/.223

Length: 16"

Twist Rate: 1:8

Gas Port: 0.750"

Gas System: Carbine

Thread Pitch: 1/2x28

Feed Ramps: M4

Finish: Parkerized


Birdcage Muzzle Break


Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.

Includes crush washer

AR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.

High quality and lightweight stripped Upper Receiver

Material: Aircraft grade Aluminum

Finish: Black Anodized

AR-15 .223/5.56 Bolt Carrier Group- Black Nitride



Machined from 8620 tool steel

Heat treated to military specifications


Machined from 9310 tool steel

Heat treated to military specifications

Shot Peened

Ground to meet military required tolerances

MPI (Mag Particle Inspected)

Gas Key

Machined from 4140

Heat treated to military specifications


Machined from 4140

Heat treated to military specifications

Shot peened

Firing Pin

Machined from 8640 tool steel

Heat treated to military specifications

Ground to meet military required tolerances

Coated with .0002”-.0003” of hard chrome per MIL-STD-171

Cam Pin

Machined from 4340

Quench and temper heat treat

Ground to meet military required tolerances

Charging Handle

Body is 6061 T6 Billet Aluminum

Latch is 7075 T6 

Black Type III Hardcoat Anodizing

Dust Cover

Dust Cover, Spring, and Rod are constructed from 4150 Steel

Black Type III Hardcoat Anodizing

Forward Assist

Constructed from 4150 Steel

 Includes Plunger, Forward Assist Pawl, Retainer pin, and spring

Gas Block


Constructed of Steel

Set screw mounts

Fits .750 Dia Barrels

Color: Black Phosphate finish

Gas Tube

Material: Stainless Steel (optimal heat and corrosion resistance)

Mil-Spec Dimensions (consistant gas flow)

Length: 9.75"

Made in the U.S.A

AR-15 Standard Lower Receiver Parts Kit-LPK17

Complete Kit Includes:

  Standard AR-15 Pistol Grip (Black)

    Standard Trigger Guard

    Semi Trigger

    Semi Hammer

    Semi Disconnector

    Semi Selector

    Bolt Catch Spring

    Detent Spring

    Bolt Catch Buffer

    Take Down Detent

    Bolt Catch

    Magazine Catch Spring

    Bolt Catch Roll Pin

    Magazine Catch Button

    Magazine Catch

    Front Pivot Pin

    Hammer Spring

    Trigger Spring

    Pistol Grip Screw

    Pistol Grip Lock Washer

    Selector Spring

    Detent Selector

    Hammer Pin

    Trigger Pin

    Take Down Pin

    Buffer Retainer Pin

    Buffer Retainer Spring

    Disconnector Spring

AR-15 | AR-10 Collapsible Mil-Spec Carbine Stock

Material: Molded from Reinforced Plastic Composite

Finish: Matte Black

Designed for Mil-Spec 6-Position Buffer Tubes

Metal Sling Loop/Attachment installed

AR-15 6 Position Mil Spec Buffer Tube Assembly

This kit fits .223/5.56 Mil-spec Sized stocks


Mil-Spec 6-Postion Receiver Tube

Precision Machined from 6061/T6 Aircraft Grade Aluminum

Fits most .223/5.56 receivers

3.0 OZ Mil-Spec Buffer

Mil-Spec Buffer Spring

Steel Castle Nut with 4 slots for castle wrench and hole for older style Wrench

Steel End Plate

Kit come with:

Mil spec 6 position buffer tube x1

Buffer x1

Buffer spring x1

Castle nut x1

End plate x1

UTG Foldable Foregrip with Storage

UTG Ambidextrous 5-position Foldable Foregrip In Black. This Tactical Grip Has Ergonomic Finger Grooves for Most Comfortable Foregrip. Adjustable Foregrip with 5 positions to allow for versatile shooting positions and enhance target lock. Performance under toughest environments press the position button to fold forward/backward and release the Button to lock in desired position designed to mount on any picatinny/weaver rail with ergonomic and Non-slip features for superior control of weapon ambidextrous design for right and left hand use, complete with battery/tool compartment and pressure switch housing. One year warranty.

5 Adjustable Foregrip Positions

One Hand Operation

Secure Fit On Any Picatinny Rail

Ergonomic Finger Grooves

Comfortable Foregrip


Tactical Pattern Accenting

Non-Slip Features

Material: Polymer

Color: Black

Battery Storage

Integrated Pressure Switch Pocket

Internal Storage Compartment

Front and Rear Sight Polymer Flip-Up Sights

Length: 2.6"

Weight: 2 oz

Thumb slide mechanism

Full Windage & Elevation Adjustment (tool included)

Compatible for 22mm/20mm Weaver Standard Rail

Seller provided no "Additional Terms of Sale"
Mfg Part Number